scarles

DAVIES CRAIG ELECTRIC WATER PUMP - EWP115 ALLOY KIT 12V (Order in)

SKU: SCR DAV0001

$496

*NOTE* This product is not currently stocked in store and is Order in, it will take Roughly 5-7 working days to order in

The EWP115 Alloy12V is available for purchase in following options:

Pump Only (Part #8140)
Kit (Part #8040)
Combo with Controller (Part #8950)
The EWP115 (115 litres per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. Its a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

The EWP115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power the EWP115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).

Voltage: 12 Volt Pump
Operating voltage: 3V DC to 15V DC
Maximum current: 10A @ 13V
Flow rate (max): 139 L/min (36.7 US gal/min) @ 13V DC
Operating temp.: -40 to 120C (-40 to 248F)
Pump design: Clockwise centrifugal with volute chamber
Pump weight: 920 grams (2.03 lb)
Pump material: Aluminium (powder coated)
Burst pressure: 500 kPa (72.5 psi)
Seal: Ceramic face seal
Self Priming: No, none of our pumps are self-priming
Fits hose sizes: 35mm to 51mm (1 to 2) Inlet: -16AN (12) Outlet: -16AN (12)
Push-On fitting Size: EWP Inlet and Outlet 38mm with 3mm Sleeve (#8510) 44mm with 6mm Sleeve (#8511) 51mm

Recently viewed