


About
Listing is for:
1x Cooling fan
Over 10,000 sold! This is probably the single best cooling mod you can do to your car!
The GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR/KA engine.
- Direct replacement of the standard fan
- Pulls 60% more air than the factory SR fan
We do sell an RB/ VG specific fan
NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14/S15? with Nismo engine mounts are fine and our fan will fit.
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
Suits:
NISSAN
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
Listing is for:
1x Cooling fan
Over 10,000 sold! This is probably the single best cooling mod you can do to your car!
The GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR/KA engine.
- Direct replacement of the standard fan
- Pulls 60% more air than the factory SR fan
We do sell an RB/ VG specific fan
NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14/S15? with Nismo engine mounts are fine and our fan will fit.
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
Suits:
NISSAN
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
GKTECH SR20/KA24 HIGH PERFORMANCE ENGINE FAN - 60% MORE AIR FLOW
- Regular price
- $219.99
- Sale price
- $219.99
- Regular price
-
Translation missing: en.products.product.sku:SCR GKT0091
Couldn't load pickup availability

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz
