*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks

Listing is for:
1x Pair of RCC adapters

The GKTECH billet aluminium GTR roll center adjusters are an easy DIY bolt-in and provide a notable difference in the handling of your vehicle, particularly for lowered cars.

When your car is lowered, like most GTRs are, the lower arm will now be pointing slightly upwards which will lower the roll center (which is the point at which the car rolls about) this gives the car leverage and makes it easier for the car to roll from side to side.

We want to correct the angle of the lower a-arm which the roll center correction kit does by adjusting that arm back to parallel, which in turn raises the roll center back up, increasing roll resistance and ultimately putting the roll center BACK to where it should be, but with a lower and cooler GTR.

No further modifications are required, simply unbolt the standard ball joint (2 bolts), slip in the adapter (20mm, and with/without the extra 5mm) and install the new longer bolts.

- 6061 Billet Aluminium
- DIY Bolt in installation
- 20-25mm roll center adjustment

Suits:
NISSAN
R32 SKYLINE GTR
R33 SKYLINE GTR
R34 SKYLINE GTR