


About
*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks
Listing is for:
1x Pair of rear knuckles
After spending a combined 8 years of product development and selling over 1,000 pairs of our S Chassis knuckles we naturally progressed towards the Z's.
We have developed a lightweight yet strong drop knuckle. They come with dual caliper brackets as standard, high-quality PTFE lined spherical bearings throughout and have all new kinematics to drastically improve anti-squat, bump steer, camber gain curves and raised roll center height.
Ability to run dual caliper without spacing the rotor out
Ability to run drum brake in standard position with dual calipers (or single caliper) installed
The drop is 40 mm - optimized for cars 40 mm lower than factory ride height (more drop would have required proprietary arms)
High-quality PTFE lined spherical bearings throughout as standard, common bearing size so replacements are easy to get and affordable (QA1/FK part #COM10T)
All new kinematics to significantly increase grip over regular drop knuckles
Optimized camber curve for more even tire wear
Optimized bump steer for toe-in under compression without OEM arms' elastokinematics
Increased anti-squat for more rear weight transfer and traction
Raised roll center height for better handling
Lightweight sheet metal design optimized using finite element analyses for ultimate strength - fully dressed weight (bearings, spacers, circlips) 3.9kg (standard knuckle is 5.1kg)
INSTALLATION NOTES:
Aftermarket toe and traction rods ARE required and MUST have rose joints as the suspension mounting points on the knuckle are significantly altered and rubber or similar wouldn't have enough misalignment to work. Lower camber arms and upper camber arms can be OEM or aftermarket and do not need to be changed. OEM bushings in lower control arms will produce different bump steer curves
For optimal results our upper camber arms and our anti squat relocation kit are recommended
Suits:
NISSAN
V35 SKYLINE
Z33 350Z
Z34 370Z
*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks
Listing is for:
1x Pair of rear knuckles
After spending a combined 8 years of product development and selling over 1,000 pairs of our S Chassis knuckles we naturally progressed towards the Z's.
We have developed a lightweight yet strong drop knuckle. They come with dual caliper brackets as standard, high-quality PTFE lined spherical bearings throughout and have all new kinematics to drastically improve anti-squat, bump steer, camber gain curves and raised roll center height.
Ability to run dual caliper without spacing the rotor out
Ability to run drum brake in standard position with dual calipers (or single caliper) installed
The drop is 40 mm - optimized for cars 40 mm lower than factory ride height (more drop would have required proprietary arms)
High-quality PTFE lined spherical bearings throughout as standard, common bearing size so replacements are easy to get and affordable (QA1/FK part #COM10T)
All new kinematics to significantly increase grip over regular drop knuckles
Optimized camber curve for more even tire wear
Optimized bump steer for toe-in under compression without OEM arms' elastokinematics
Increased anti-squat for more rear weight transfer and traction
Raised roll center height for better handling
Lightweight sheet metal design optimized using finite element analyses for ultimate strength - fully dressed weight (bearings, spacers, circlips) 3.9kg (standard knuckle is 5.1kg)
INSTALLATION NOTES:
Aftermarket toe and traction rods ARE required and MUST have rose joints as the suspension mounting points on the knuckle are significantly altered and rubber or similar wouldn't have enough misalignment to work. Lower camber arms and upper camber arms can be OEM or aftermarket and do not need to be changed. OEM bushings in lower control arms will produce different bump steer curves
For optimal results our upper camber arms and our anti squat relocation kit are recommended
Suits:
NISSAN
V35 SKYLINE
Z33 350Z
Z34 370Z
GKTECH Z33 350Z/V35/Z34 370Z REAR KNUCKLES WITH ALL NEW KINEMATICS (Order in)
- Regular price
- $1,784.99
- Sale price
- $1,784.99
- Regular price
-
Translation missing: en.products.product.sku:SCR GKT0474
Couldn't load pickup availability

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz
