


About
*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks
Listing is for:
1x 370z handbrake INSIDE console trim mount - LEFT or RIGHT side (Let us know when ordering)
1x Low Hydraulic Handbrake assembly
1x 5/8" remote mount master cylinder
1x Remote mount reservoir kit
1x Handbrake Handle (silver, black, blue, pink, purple, red, orange, gold or neo chrome) Let us know what colour handle you want when ordering.
When installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets.
The brackets bolt to the stock transmission shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the transmission tunnel.
For the 370z specifically, we have made a horiozontal assembly so that the factory items in the center console don't have to be removed or modified (besides a hole for the lever to pop through)
- 100% direct fit with no modifications required to the gearbox tunnel
- Available for either LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
NOTE: The assembly bracket option (LOWX-HBRK) in this listing is the ONLY assembly bracket that can be used with these mounts.
NOTE: These master cylinders are specific to the use of the assembly bracket in this listing (LOWX-HBRK) being that they are remote reservoir as the master cylinder lays horizontally.
Suits:
Nissan
Z34 370Z
*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks
Listing is for:
1x 370z handbrake INSIDE console trim mount - LEFT or RIGHT side (Let us know when ordering)
1x Low Hydraulic Handbrake assembly
1x 5/8" remote mount master cylinder
1x Remote mount reservoir kit
1x Handbrake Handle (silver, black, blue, pink, purple, red, orange, gold or neo chrome) Let us know what colour handle you want when ordering.
When installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets.
The brackets bolt to the stock transmission shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the transmission tunnel.
For the 370z specifically, we have made a horiozontal assembly so that the factory items in the center console don't have to be removed or modified (besides a hole for the lever to pop through)
- 100% direct fit with no modifications required to the gearbox tunnel
- Available for either LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
NOTE: The assembly bracket option (LOWX-HBRK) in this listing is the ONLY assembly bracket that can be used with these mounts.
NOTE: These master cylinders are specific to the use of the assembly bracket in this listing (LOWX-HBRK) being that they are remote reservoir as the master cylinder lays horizontally.
Suits:
Nissan
Z34 370Z
GKTECH Z34 370Z 5/8" IN CONSOLE CAR SPECIFIC HANDBRAKE ASSEMBLY (Order in)
- Regular price
- $589.99
- Sale price
- $589.99
- Regular price
-
Translation missing: en.products.product.sku:SCR GKT0709
Couldn't load pickup availability

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz
