




About
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
1x Fitting
The AN8 rollover safety valve allows the fuel tank or fuel cell to maintain its status without pressure build-up or unwanted vacuum during use.
And it is equipped with roll-over protection if an accident would occur and the car would end up on its roof. Comes in three different sizes, all safe for petrol, ethanol and methanol. Used as standard on the Nuke Performance CFC Units. Comes with a Viton O-ring. Easy to clean, inspect and maintain with its simple two-piece design.
In case of an accident the internal stainless steel ball seals and prevents fuel from leaking out of the fuel tank or fuel cell out into the ventilation line.
Min. mounting hole : 19mm
Max. mounting hole : 20mm
Max. material thickness : 6mm
The Vent Safety Valves is available in AN-6, AN-8 and AN-10 male fittings. And the hole for assembly is prefered to be 3/4 UNF threaded, otherwise hole diameter of minimum 19mm and maximum 20mm. Can be mounted to materials from 1mm to 6mm thickness.
Choose between different sizes when placing order.
If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for.
Available in several sizes and varieties.
Quantity : 1pc
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
1x Fitting
The AN8 rollover safety valve allows the fuel tank or fuel cell to maintain its status without pressure build-up or unwanted vacuum during use.
And it is equipped with roll-over protection if an accident would occur and the car would end up on its roof. Comes in three different sizes, all safe for petrol, ethanol and methanol. Used as standard on the Nuke Performance CFC Units. Comes with a Viton O-ring. Easy to clean, inspect and maintain with its simple two-piece design.
In case of an accident the internal stainless steel ball seals and prevents fuel from leaking out of the fuel tank or fuel cell out into the ventilation line.
Min. mounting hole : 19mm
Max. mounting hole : 20mm
Max. material thickness : 6mm
The Vent Safety Valves is available in AN-6, AN-8 and AN-10 male fittings. And the hole for assembly is prefered to be 3/4 UNF threaded, otherwise hole diameter of minimum 19mm and maximum 20mm. Can be mounted to materials from 1mm to 6mm thickness.
Choose between different sizes when placing order.
If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for.
Available in several sizes and varieties.
Quantity : 1pc
Nuke Tank Vent Safety Valve AN-8 (3/4 UNF) to AN8 Male (Order in)
- Regular price
- $72.99
- Sale price
- $72.99
- Regular price
-
Translation missing: en.products.product.sku:SCR NUK0468
Couldn't load pickup availability

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz

