


About
*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website https://store.partsshopmax.com/ . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states
Listing is for:
1x Pair of Tie rods
Pair of hardened chromoly adjustable clevis style front tie rods for C5 and C6 Corvette equipped with our forged super angle knuckles.
PTFE lined, low torque, high misalignment M16 spherical rod ends on inner and outer joints. This complete tie rod has way more misalignment angle than conventional tie rods in order to allow 70 degrees of steering angle without binding the joints or flexing the rack shaft near full travel.
The length is suitable only for use with extended control arms. Bolts right into the Ackerman adjustable hardware on the MAX knuckle.
Option for OEM knuckle taper is in shopping cart. Minimum length setting is 390mm from rack shaft to outer joint center.
*** The cup end of the steering rack casting needs some grinding to clear the M14 bolt going through the clevis. If you do not grind the end of the rack, you will not get full steering angle
*** While you are in there cutting the left side steering rack cup its also a good time to cut off the steel band that retains the right side OEM bushing mount thats prone to ripping off.
Purchase our billet solid rack mount sold separately on this site as part of your complete & more reliable steering angle improvements.
*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website https://store.partsshopmax.com/ . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states
Listing is for:
1x Pair of Tie rods
Pair of hardened chromoly adjustable clevis style front tie rods for C5 and C6 Corvette equipped with our forged super angle knuckles.
PTFE lined, low torque, high misalignment M16 spherical rod ends on inner and outer joints. This complete tie rod has way more misalignment angle than conventional tie rods in order to allow 70 degrees of steering angle without binding the joints or flexing the rack shaft near full travel.
The length is suitable only for use with extended control arms. Bolts right into the Ackerman adjustable hardware on the MAX knuckle.
Option for OEM knuckle taper is in shopping cart. Minimum length setting is 390mm from rack shaft to outer joint center.
*** The cup end of the steering rack casting needs some grinding to clear the M14 bolt going through the clevis. If you do not grind the end of the rack, you will not get full steering angle
*** While you are in there cutting the left side steering rack cup its also a good time to cut off the steel band that retains the right side OEM bushing mount thats prone to ripping off.
Purchase our billet solid rack mount sold separately on this site as part of your complete & more reliable steering angle improvements.
PSM C5 & C6 LimitBreak Clevis TIE Rod (Order in)
- Regular price
- $649.99
- Sale price
- $649.99
- Regular price
-
Translation missing: en.products.product.sku:SCR PSM C6TIERLB
Couldn't load pickup availability
First time buying from us? Get $10 off.
Sign up here to grab your discount.

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz
