


About
*NOTE* This product is not currently stocked in store, takes 2-5 working days to get in
Listing is for:
1x Wastegate actuator
The ZD30 3.0-litre four-cylinder turbo diesel was the most popular engine choice for Patrol buyers. However, in stock form, it tends to struggle under the Patrol?s weight ? a problem exacerbated when heavy off-road equipment and larger tyres are fitted. Therefore, it?s not uncommon for owners to invest in tuning their Patrols to improve the vehicle?s performance and drivability.
One of the problems when tuning a ZD30 is the erratic boost curve afforded by the standard actuator fitted to the VNT-style turbo, preventing the engine from reaching its full potential. This is the problem Turbosmart set out to solve with the new IWG-75 internal wastegate actuator for the ZD30DDTi.
Our dyno testing showed that the standard actuator experienced a dramatic 5PSI boost drop between 1700 and 2400 RPM, which caused a corresponding reduction in power and torque. While tuning fuel and timing increased the Patrol?s peak power, it could not eradicate this drop caused by a lack of boost.
The Turbosmart IWG75 provided faster boost build-up, less drop-off at the top end, kept the boost steadier throughout the rev range ? and eliminated the mid-range boost drop. The result was the higher peak power and significantly more power and torque where you need it daily ? in the mid-range.
Combined with a chiptune, the results of the Turbosmart actuator were astounding. At 2000 RPM, the standard car produced 37.4kW at the wheels. With a chip alone, that was increased to 46.2kW. Adding the Turbosmart actuator, the power jumped to 63kW at the same revs ? almost 60% higher than the standard.
The IWG75 Kit for the ZD30DDTi includes a Boost Reference Adapter that attaches between the vehicle?s standard MAP sensor and the top-mount intercooler, providing an accurate manifold pressure reference to the actuator without having to tap into the manifold.
If you?re tuning your Patrol, Turbosmart?s Internal Wastegate Actuator helps you fix the Patrol?s boost curve and get more power where it matters.
Includes Boost Reference Adapter with two pressure ports, two pressure nipples, a blanking plug, and fitting hardware.
Suits:
Nissan Patrol ZD30DDTi (Common Rail Intercooled) 3.0TD 2000-current.
*NOTE* This product is not currently stocked in store, takes 2-5 working days to get in
Listing is for:
1x Wastegate actuator
The ZD30 3.0-litre four-cylinder turbo diesel was the most popular engine choice for Patrol buyers. However, in stock form, it tends to struggle under the Patrol?s weight ? a problem exacerbated when heavy off-road equipment and larger tyres are fitted. Therefore, it?s not uncommon for owners to invest in tuning their Patrols to improve the vehicle?s performance and drivability.
One of the problems when tuning a ZD30 is the erratic boost curve afforded by the standard actuator fitted to the VNT-style turbo, preventing the engine from reaching its full potential. This is the problem Turbosmart set out to solve with the new IWG-75 internal wastegate actuator for the ZD30DDTi.
Our dyno testing showed that the standard actuator experienced a dramatic 5PSI boost drop between 1700 and 2400 RPM, which caused a corresponding reduction in power and torque. While tuning fuel and timing increased the Patrol?s peak power, it could not eradicate this drop caused by a lack of boost.
The Turbosmart IWG75 provided faster boost build-up, less drop-off at the top end, kept the boost steadier throughout the rev range ? and eliminated the mid-range boost drop. The result was the higher peak power and significantly more power and torque where you need it daily ? in the mid-range.
Combined with a chiptune, the results of the Turbosmart actuator were astounding. At 2000 RPM, the standard car produced 37.4kW at the wheels. With a chip alone, that was increased to 46.2kW. Adding the Turbosmart actuator, the power jumped to 63kW at the same revs ? almost 60% higher than the standard.
The IWG75 Kit for the ZD30DDTi includes a Boost Reference Adapter that attaches between the vehicle?s standard MAP sensor and the top-mount intercooler, providing an accurate manifold pressure reference to the actuator without having to tap into the manifold.
If you?re tuning your Patrol, Turbosmart?s Internal Wastegate Actuator helps you fix the Patrol?s boost curve and get more power where it matters.
Includes Boost Reference Adapter with two pressure ports, two pressure nipples, a blanking plug, and fitting hardware.
Suits:
Nissan Patrol ZD30DDTi (Common Rail Intercooled) 3.0TD 2000-current.
Turbosmart IWG75 Wastegate Actuator Suit Nissan Patrol ZD30DDTi 7psi (Order in)
- Regular price
- $355.41
- Sale price
- $355.41
- Regular price
-
Translation missing: en.products.product.sku:SCR TST2458
Couldn't load pickup availability

Standard $8 shipping throughout New Zealand*
Please note the Standard Shipping Rate excludes bulky or heavy items over 0.015m3, discretion and common sense will be used.
Normal Delivery Times
Overnight service for Auckland.
Rest of North Island 1-2 days.
South Island 1-3 days.
International Shipping
Request a quote and we will get back to you before you purchase with rates and delivery times.
Shipping Rate Disclaimer
*$8 SHIPPING IS ONLY APPLICABLE ONLINE AT WWW.SCARLES.CO.NZ.

Refunds and Returns Policy
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full credit or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
For more information head over to our FAQs page or email us sales@scarles.co.nz
