About

Description

*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks

Listing is for:
1x Pair of Z33 350Z on car adjustable front lower control arms
1x Pair of Z33 350z front on car adjustable compression rod
1x Pair of Z33 350z Grip Front Drop Knuckles

below is a brief explanation of the products in this combo

Lateral Link (FLCA) & Compression Rod
The two-piece arm design allows for better bump steer control, resulting in a more consistent alignment while also improving camber gain when turning which maximizes front-end grip by allowing for a flatter contact patch.

The lateral links are adjustable from -5mm to +35mm relative to the OEM length and have multiple mounting locations for the swaybar to adjust the roll bar rate.

The compression rods are adjustable from -5mm to +30mm relative to the OEM length. The kit includes two polyurethane bushes to ensure the arm returns to the center as required when the OEM rubber bushes are deleted through the use of this arm.

Grip Front Drop Knuckle
We've designed a 30mm drop knuckle to raise the roll center height, enhancing roll resistance and overall handling. The bump steer has been optimized with built-in adjustment, allowing you to fine-tune your setup for predictability and consistency. Additionally, the ackermann is adjustable, offering different steering feel preferences to suit your driving style.

Our knuckles ensure optimized camber gain in roll and bump, resulting in a flatter contact patch and more consistent steering feedback. If you want to run ABS with our knuckles, we offer an option to add a bracket to hold the ABS sensor as well.

NOTE: An internal wheel clearance of 425mm or 16.75" is required. This typically means that an 18" wheel is required. However some models, 18" Enkie RPF1s for example, have smaller barrels and do not clear.

Optional items in the photo that are sold separately:
- Z33 350z Super Lock Drift Knuckle ABS sensor holder (PAIR)
- V2 Z33 350Z/V35 Front Upper Camber Arms (FUCA'S)
- Z33 350z Front swaybar adjustable end links

Suits:
Nissan
Z33 350Z
V35 SKYLINE

Coupe
2003-2008 Z33 350z
2003-2007 V35 (G35)

Sedan
2003-2006 V35 (G35)

Note - 2007-2008 V35 (G35) SEDAN uses Z34 370z/ V36 (G37) suspension

Description

*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks

Listing is for:
1x Pair of Z33 350Z on car adjustable front lower control arms
1x Pair of Z33 350z front on car adjustable compression rod
1x Pair of Z33 350z Grip Front Drop Knuckles

below is a brief explanation of the products in this combo

Lateral Link (FLCA) & Compression Rod
The two-piece arm design allows for better bump steer control, resulting in a more consistent alignment while also improving camber gain when turning which maximizes front-end grip by allowing for a flatter contact patch.

The lateral links are adjustable from -5mm to +35mm relative to the OEM length and have multiple mounting locations for the swaybar to adjust the roll bar rate.

The compression rods are adjustable from -5mm to +30mm relative to the OEM length. The kit includes two polyurethane bushes to ensure the arm returns to the center as required when the OEM rubber bushes are deleted through the use of this arm.

Grip Front Drop Knuckle
We've designed a 30mm drop knuckle to raise the roll center height, enhancing roll resistance and overall handling. The bump steer has been optimized with built-in adjustment, allowing you to fine-tune your setup for predictability and consistency. Additionally, the ackermann is adjustable, offering different steering feel preferences to suit your driving style.

Our knuckles ensure optimized camber gain in roll and bump, resulting in a flatter contact patch and more consistent steering feedback. If you want to run ABS with our knuckles, we offer an option to add a bracket to hold the ABS sensor as well.

NOTE: An internal wheel clearance of 425mm or 16.75" is required. This typically means that an 18" wheel is required. However some models, 18" Enkie RPF1s for example, have smaller barrels and do not clear.

Optional items in the photo that are sold separately:
- Z33 350z Super Lock Drift Knuckle ABS sensor holder (PAIR)
- V2 Z33 350Z/V35 Front Upper Camber Arms (FUCA'S)
- Z33 350z Front swaybar adjustable end links

Suits:
Nissan
Z33 350Z
V35 SKYLINE

Coupe
2003-2008 Z33 350z
2003-2007 V35 (G35)

Sedan
2003-2006 V35 (G35)

Note - 2007-2008 V35 (G35) SEDAN uses Z34 370z/ V36 (G37) suspension

GKTECH Z33 350z/ V35 Front Grip Combo (Order in)

Regular price
$4,589.99
Sale price
$4,589.99
Regular price
$0.00
Tax included. Shipping calculated at checkout.

Translation missing: en.products.product.sku:SCR GKT01019

First time buying from us? Get $10 off.
Sign up here to grab your discount.

Order in
NZ’s Fastest Auto Parts Shippers
We provide hassle-free shopping with super fast shipping for all your parts needs.
Open 7 Days
Got questions? Visit our store or contact us for any product or order-related queries.

Check Out These Related Products